FMD1 slipping clutch test apparatus –
for comprehensive, simple and reliable testing

 

The FMD1 slipping clutch test apparatus from STAHL CraneSystems is a tool especially developed for service personnel.
It tests the setting of a chain hoist's slipping clutch electronically. It permits test loads of up to 4,000 kg and chain sizes up to
11.3 mm. Technically the FMD1 is based on our overload sensors, which have proven themselves in practice for many years. Its robust housing is made completely of metal.
The modern evaluation device is also extremely tough. A protector, pulled over the housing like a second skin, shields it from hard knocks. Basic information such as the battery charge is shown on the illuminated graphic display. Menu navigation of the evaluation device is intuitive and simple.

 

FMD1 slipping clutch test apparatus


FMD1 – the benefits

  • Know-how from decades of experience in servicing chain hoists
  • Original technology from a chain hoist manufacturer
  • Modern evaluation device with protector
  • Illuminated graphic display
  • Internal test program for maximum availability
  • Intuitive use
  • Sensor technology proven thousands of times

 
 


   Slipping clutch test apparatus FMD1 - Fully equipped

FMD1 – the technology in detail

  • 4–20 mA analog sensors with integrated amplifier electronics
  • High sensor accuracy ± 2 %
  • Robust all-metal design
  • Testing range up to 4,000 kg on one chain fall
  • Suitable for chains with links up to
    11.3 mm thick
  • Weight including case 9.2 kg


  

Fully equipped

  • Evaluation device with protector and strap
  • Three analog sensors
  • Load cell
  • Robust metal case
  • Two chain stoppers
  • Three chain adapters
  • Three 1.5 V AA batteries
  • Operating instructions

 

> Contact

STAHL CraneSystems GmbH

Fon: +49 7940 128 0
Fax: +49 7940 55665
E-Mail Contact



Spare part center

Fon: +49 7940 128 2245
Fax: +49 7940 128 2249

 

> Further Contact

Contact Europe
Contact worldwide