Application examples – STAHL CraneSystems jib cranes
prove themselves in rugged everyday work

STAHL CraneSystems: Boat crane in the natural harbour of Gustow on Rügen
   This boat crane from Vetter Krantechnik GmbH has been in use in the natural harbour of Gustow on Rügen island since 2011. Equipped with four ST 50 chain hoists on horizontal booms it can lift boats up to 20 tonnes in weight without any additional cross-beam. A cumulative load controller ascertains the total load and monitors the difference in load on the booms: if the load differs by more than 1 t it disconnects the chain hoists.
The top boom, equipped with an ST 10 chain hoist, is designed for raising masts.

  The Brombach Lake covers the wide area of 890 ha.
In Ramsberg leisure centre alone there is a marina with 580 berths on water and 170 on land.
Jib cranes with S.W.L.s of up to 5 t hoist the boats in and out of the water.
STAHL CraneSystems: Jib cranes as workplace cranes   Pillar jib cranes have proven themselves in ten thousands of applications! They can be used indoors or outdoors and are classified to DIN 15018 H2 B3.
Here the cranes, as workplace cranes equipped with electric chain hoists, help load machine tools.
STAHL CraneSystems: Jib cranes as workplace cranes
   Jib cranes can also be designed as off-standard cranes for complicated material handling tasks.
Here they lift tools and small parts onto the service and assembly platform in railway carriage production.
Jib cranes in STAHL CraneSystems' wire rope hoist final assembly
   In STAHL CraneSystems’ wire rope hoist final assembly, jib cranes of up to 1,000 kg S.W.L. are used as workplace cranes.


 
 

> Jib cranes

Overview
Application examples

 

> Contact

STAHL CraneSystems GmbH

Fon: +49 7940 128 0
Fax: +49 7940 55665
E-Mail Contact



Spare part center

Fon: +49 7940 128 2245
Fax: +49 7940 128 2249

 

> Further Contact

Contact Europe
Contact worldwide