SW winch –
compact, long-lived, amazingly low-priced

 

The SW winch meets our customers’ most important requirements: high safe working load combined with compact dimensions. The optimum approach dimensions allow it to make the best possible use of the production area. The SW winch is being launched in two frame sizes, as SW 10 for safe working loads from 32 t to 100 t and as SW 16 for safe working loads from 50 t to 160 t. The range comprises 18 load variants and four FEM classifications.

 

STAHL CraneSystems: SW winch

 
 

Mature design
Slightly angled return sheaves and rope sheaves in the bottom hook block as a standard feature guarantee precise rope guidance and considerably reduce wear on rope and rope sheaves. This technology has already proven itself as an off-standard feature on our reliable SHW 8 winch.

The modular principle
The SW winch is a modular design composed of high-quality standard components. This permits numerous variants and enables us to produce the new winch at an attractive price  in state-of-the art series production.

State-of-the-art technology
Frequency inverters on all drives as a standard feature ensure smooth starting and braking characteristics and minimum load swing. The modern condition monitoring system assists in error analysis and maintenance. On request the SW winch can be equipped with the ESR function: the »extended speed range« permits up to
1.7 times hoisting speed with partial load and thus makes an additional auxiliary hoist superfluous.

Ideal for crane manufacturers
The SW winch is supplied with six pre-installed panel boxes and universally marked electrical plug connections - for fast erection and commissioning. As with all our products, we offer crane manufacturers professional planning support. Our project engineers will provide assistance for tricky problems and will be pleased to answer all your technical questions.
  

SW winch - the advantages

  • Excellent price-performance ratio
  • Low approach dimensions thanks to short wheelbase
  • Reduced wear on rope and sheaves thanks to optimised angled return sheaves
  • Finely graded load capacities
    from 32 t to 160 t
  • Two frame sizes: SW 10 (32 t to 100 t) and SW 16 (50 t to 160 t)
  • Modular design for fast erection, easy maintenance and cost-effective production
  • Powerful 4-pole hoist motor
  • Frequency inverters on all drives ensure smooth starting and braking characteristics and minimum load swing
  • Continuous temperature control ensures longer service life of hoist and travel motors
  • Fast commissioning thanks to pre-installed panel boxes
  • Condition monitoring ensures fast error analysis and maintenance

SW winch – off-standard supplementary equipment

  • ESR (extended speed range) for up to 1.7 times hoisting speed with partial load. Often makes an additional auxiliary hoist superfluous
  • Overwind protection instead of rope guide
  • Radio remote control
  • Maintenance platform
  • Second brake
  • Guide rollers instead of wheel flanges

 

Information material

Product brochures

New – The SW winch

(10 pages)

   [PDF, 2.97 MB]
 
 

> Winches

Winches Overview
SHW 8 winch
SW winch
Twin Drive Concept TDC

 

> Contact

STAHL CraneSystems GmbH
Fon: +49 7940 128-0
Fax: +49 7940 55665
E-Mail Contact



Spare part center
Fon: +49 7940 128-2245
Fax: +49 7940 128-2249

 

> Further Contact

Contact Europe
Contact worldwide